Instrument cluster – FORD 2011 Mustang v.2 User Manual

Page 23

Advertising
background image

HOLD RESET TO SET MYCOLOR 1, 2, 3 (Saving your own colors)

Apart from the preset colors, you can create your own color by adjusting
the levels of the three primary colors (red, green, and blue) through the
MyColor

௡ feature to achieve any of 125 different combinations. You can

save up to three custom colors in MyColor

௡.

To enter the MyColor

௡ adjust mode, do the following (vehicle must be

stationary):

1. Press and hold RESET for three seconds at the MyColor 1, 2 or 3
menu option to reach the MyColor

௡ adjust mode.

2. Press SETUP to scroll through the R (red), G (green), B (blue) and
Exit options.

3. Press RESET to blend in more of the color being adjusted.

4. To save and exit, hold RESET for three seconds when prompted.
Pressing RESET for less than three seconds will cycle back through the
colors.

UNITS

Displays the current units English or Metric.

Press RESET to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

Press RESET to select the new Autolamp delay values of 0, 10, 20, 30,
60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is
shifted into any gear and driven.

For more information refer to Autolock in the Locks and Security
chapter.

Press RESET to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s
door is opened within 10 minutes of the ignition being turned off.

Press RESET to turn autounlock on or off.

CREATE MYKEY / MYKEY SETUP/ CLEAR MYKEY

For more information refer to MyKey™ in the Locks and Security
chapter.

Instrument Cluster

23

2011 05+ Mustang (197)
Owners Guide, 2nd Printing
USA
(fus)

Advertising