Tpms reset procedure, Crown victoria severe duty – FORD 2010 Crown Victoria v.2 User Manual

Page 277

Advertising
background image

TPMS reset tips:
• To reduce the chances of interference from another vehicle, TPMS

reset should be performed at least three feet (one meter) away from
another Ford Motor Company vehicle undergoing the TPMS reset
procedure at the same time.

• Do not wait more than two (2) minutes between resetting each tire

sensor or the system will timeout and the entire procedure will have
to be repeated on all four wheels.

• A double horn chirp indicates the need to repeat the procedure.

TPMS reset procedure

Note: It is recommended that you read the entire procedure before
attempting.

Note: To enter the reset mode, Steps 1–6 MUST be completed within
60 seconds.

1. Place the ignition in the off position and keep the key in the ignition.

2. Press and release the brake
pedal.

3. Cycle the ignition from off to on
three (3) times ending in the on
position—DO NOT start the engine.

Crown Victoria Severe Duty

277

2010 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: