Instrument cluster – FORD 2010 E-450 v.2 User Manual

Page 25

Advertising
background image

check. Instead, quickly release the stem and repeatedly press it again to
scroll through the setup menu until the message center displays
COMPASS ZONE XX.

4. Press and hold the SELECT/RESET stem for approximately two
seconds to enter the compass zone adjustment mode.

5. Press and release the SELECT/RESET stem until the desired zone
number appears.

6. Release the SELECT/RESET stem and allow the setup timer to expire
to exit the procedure.

Compass calibration adjustment

Note: For optimum calibration, drive to an open, level location away
from large metallic objects or structures. Switch off all non-essential
electrical accessories (heated rear window, heater, A/C, map lamps,
wiper, etc.) and make sure all the doors are closed.

1. Press and release the SELECT/RESET stem to scroll through the
information displays until the message center displays HOLD RESET
FOR SETUP MENU.

2. Press and hold the SELECT/RESET stem until the message center
displays HOLD RESET FOR SYSTEM CHECK. Do not hold the stem
down at this point as you do not want to enter the system check.
Instead, quickly release the stem and repeatedly press it again to scroll
through the setup menu until the message center displays COMPASS
ZONE XX.

3. Press and hold the SELECT/RESET stem for approximately two
seconds until the message center enters the compass zone adjustment
mode.

4. Press and hold the SELECT/RESET stem until the message center
displays CIRCLE SLOWLY TO CALIBRATE.

Note: This step may require up to five circles to complete the
calibration.

Note: If the SELECT/RESET stem is pressed during the calibration or
three minutes has elapsed since the beginning of the calibration without
driving the vehicle, the message center reverts back to normal operation
and the CAL will display until a successful calibration is carried out.

5. Slowly drive the vehicle in a circle less than 3 mph (5 km/h ) until the
CIRCLE SLOWLY TO CALIBRATE message changes to CALIBRATION
COMPLETED.

Instrument Cluster

25

2010 Econoline (eco)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: