FORD 2010 Edge v.1 - Manual (Page 226)

The Roll Stability Control system may be deactivated in certain
situations. See the Switching Off AdvanceTrac
௡ with RSC௡ section
following.
Switching Off AdvanceTrac
௡ with RSC௡
If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off certain features of the AdvanceTrac
௡ with RSC௡
system may be beneficial because the wheels are allowed to spin. This
will restore full engine power and will enhance momentum through the
obstacle. To switch off the AdvanceTrac
௡ with RSC௡ system press the
AdvanceTrac
௡ with RSC௡ ЉOffЉ button. Full features of the AdvanceTrac௡
with RSC
௡ system can be restored by pressing the AdvanceTrac௡ with
RSC
௡ ЉOffЉ button again or by turning off and restarting the engine.
If you switch off the AdvanceTrac
௡ with RSC௡ system, the sliding carЉ
icon will illuminate steadily. Pressing the AdvanceTrac
௡ with RSC௡
ЉOffЉ button again will turn off the Љsliding carЉ icon
.
In R (Reverse), ABS and the Engine and Brake Traction Control features
will continue to function; however, ESC and RSC
௡ are disabled.
AdvanceTrac
௡ with RSC௡ Features
Button
functions
“Sliding
car”
icon
RSC
௡
ESC
Engine
Traction
Control
Brake
Traction
Control
Default at
start-up
Illuminated
during
bulb check
Enabled Enabled Enabled Enabled
Button
pressed
momentarily
Illuminated
solid
Disabled
below
38 mph
(60 kp/h)
Disabled
below
38 mph
(60 kp/h)
Disabled
below
38 mph
(60 kp/h)
Enabled
Button
pressed
again after
deactivation
Not
illuminated
Enabled Enabled Enabled Enabled
Driving
226
2010 Edge (edg)
Owners Guide (own2002), 1st Printing
USA (fus)