Illuminated exit, Battery saver, Securicode™ keyless entry system (if equipped) – FORD 2010 Edge v.2 User Manual

Page 113: Locks and security

Advertising
background image

Illuminated exit
• When all vehicle doors are closed and the key is removed from the

ignition, the interior dome lamps, parking lamps and the puddle lamps
(if equipped) will illuminate.

The lamps will turn off if all the doors remain closed and
• 25 seconds elapse, or
• the key is inserted in the ignition.
Battery saver

The battery saver will shut off the lamps 10 minutes after the ignition
has been turned to the off position.
• If the dome lamps were turned on using the panel dimmer control, the

battery saver will shut them off 10 minutes after the ignition has been
turned to the off position.

• If the courtesy lamps were turned on because one of the vehicle doors

or the liftgate was opened, the battery saver will shut them off
10 minutes after the ignition has been turned to the off position.

• The battery saver will shut off the headlamps 10 minutes after the

ignition has been turned to the off position.

SECURICODE™ KEYLESS ENTRY SYSTEM (IF EQUIPPED)

You can use the keyless entry
keypad to:
• lock or unlock the doors without

using a key.

• recall memory seat/power mirrors

positions (if equipped).

The keypad can be operated with the factory set 5–digit entry code; this
code is located on the owner’s wallet card in the glove box and is
available from your authorized dealer. You can also create up to three of
your own 5–digit personal entry codes.

When pressing the controls on the keypad, press the middle of the
controls to ensure a good activation.

Programming a personal entry code and keypad association to
memory seats and mirrors (if equipped)

To create your own personal entry code:

1. Enter the factory set code.

Locks and Security

113

2010 Edge (edg)
Owners Guide, 2nd Printing
USA
(fus)

Advertising