Removing the jumper cables, Roadside emergencies – FORD 2010 Escape v.2 User Manual
Page 270
Advertising
Removing the jumper cables
Remove the jumper cables in the reverse order that they were
connected.
1. Remove the jumper cable from the ground metal surface.
Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.
2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.
+
–
+
–
+
–
+
–
Roadside Emergencies
270
2010 Escape (204)
Owners Guide, 2nd Printing
USA (fus)
Advertising
This manual is related to the following products: