Exterior mirrors, Power side view mirrors, Driver controls – FORD 2010 Escape v.2 User Manual

Page 73

Advertising
background image

Do not block the sensors on the front and back of the interior
rear view mirror since this may impair proper mirror
performance.

Do not clean the housing or glass of any mirror with harsh
abrasives, fuel or other petroleum-based cleaning products.

Note: If equipped with a rearview camera system, a video image will
display in the mirror or the navigation system display (if equipped) when
the vehicle is put in R (Reverse). As you shift into any other gear from R
(Reverse), the image will remain for a few seconds and then turn off.
Refer to Rearview camera system in the Driving chapter.

EXTERIOR MIRRORS

Power side view mirrors

WARNING: Do not adjust the mirror while the vehicle is in
motion.

To adjust your mirrors:

1. Rotate the control clockwise to
adjust the right mirror and rotate
the control counterclockwise to
adjust the left mirror.

2. Move the control in the direction
you wish to tilt the mirror.

3. Return to the center position to lock mirrors in place.

Blind spot mirrors

Your vehicle is equipped with blind spot mirrors. Refer to Blind spot
mirrors
in the Driving chapter.

Driver Controls

73

2010 Escape (204)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: