FORD 2010 Expedition v.2 - Manual (Page 204)

The rear seat heat controls are located on the rear of the center console.
To operate the heated seats:
• Press the indicated side of the
control for maximum heat.
• Press again to deactivate.
• Press the indicated side of the
control for minimum heat.
• Press again to deactivate.
The heated seat module resets at every ignition run cycle. While the
ignition is in the on position, activating the high or low heated seat
switch enables heating mode. When activated, they will turn off
automatically when the engine is turned off.
The indicator light will illuminate when the heated seats have been
activated.
3rd row seats
Ensure that no objects such as books, purses or briefcases are on the
floor in front of the third row seats or on the seat cushion before
lowering them. Ensure that the head restraints are lowered. Ensure that
the second row seats are not reclined.
Folding down the 3rd row seats to the load floor
WARNING: To prevent possible damage to the seat or safety
belts, ensure that the safety belts are not buckled when moving
the seat to the load floor position.
Seating and Safety Restraints
204
2010 Expedition (exd)
Owners Guide, 2nd Printing
USA (fus)