Second row comfort guide, Safety belt extension assembly, Seating and safety restraints – FORD 2010 Explorer v.2 User Manual

Page 196

Advertising
background image

Second row comfort guide

The second row outboard
lap/shoulder belt is equipped with a
belt comfort guide. This guide is
attached to the quarter trim panel
and is used to adjust the comfort of
the shoulder belt for smaller
occupants in the outboard second
row seats.

To adjust the comfort guide:

1. Slip the shoulder belt into the
belt guide.

2. Slide the guide up or down along
the webbing so that the belt is
centered on the occupant’s shoulder.

WARNING: Position the safety belt comfort guide so that the
belt rests across the middle of your shoulder. Failure to adjust

the safety belt properly could reduce the effectiveness of the safety
belt and increase the risk of injury in a collision.

Safety belt extension assembly

If the safety belt is too short when fully extended, there is an 8 inch
(20 cm) safety belt extension assembly that can be added (part number
611C22). This assembly can be obtained from an authorized dealer.

Seating and Safety Restraints

196

2010 Explorer (exp)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: