Determining if the system is operational, Sos post-crash alert system, Seating and safety restraints – FORD 2010 Explorer v.2 User Manual

Page 216

Advertising
background image

WARNING: If the Safety Canopy

௡ System has deployed, the

Safety Canopy

will not function again. The Safety

Canopy

System (including the A, B and C pillar trim) must be

inspected and serviced by an authorized dealer. If the Safety
Canopy

௡ is not replaced, the unrepaired area will increase the risk of

injury in a collision.

Determining if the system is operational

The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to the Airbag readiness
section in the Instrument Cluster chapter. Routine maintenance of the
airbag is not required.

Any difficulty with the system is indicated by one or more of the
following:
• The readiness light (same light as for front airbag system) will either

flash or stay lit.

• The readiness light will not illuminate immediately after ignition is

turned on.

• A series of five beeps will be heard. The tone pattern will repeat

periodically until the problem and light are repaired.

If any of these things happen, even intermittently, contact your
authorized dealer as soon as possible. Unless serviced, the system may
not function properly in the event of a collision or rollover event.

SOS Post-Crash Alert System™

The system automatically flashes the turn signal lamps and sounds the
horn three times at four second intervals in the event of a serious impact
that deploys an airbag (front, side, side curtain or Safety Canopy

௡) or

the safety belt pretensioners.

The system can be turned off when any one of the following actions are
taken by the driver or any other person:
• pressing the hazard control button,
• or pressing the panic button on the remote entry transmitter.
The feature will continue to operate until the vehicle runs out of power.

Seating and Safety Restraints

216

2010 Explorer (exp)
Owners Guide, 2nd Printing
USA
(fus)

Advertising
This manual is related to the following products: