Engine oil, Checking the engine oil, Maintenance and specifications – FORD 2010 F-150 v.2 User Manual

Page 363

Advertising
background image

To prolong the life of the wiper blades, it is highly recommended to
scrape off the ice on the windshield before turning on the wipers. The
layer of ice has many sharp edges and can damage the micro edge of the
wiper rubber element.

ENGINE OIL

Checking the engine oil

Refer to the scheduled maintenance information for the appropriate
intervals for checking the engine oil.

1. Make sure the vehicle is on level ground.

2. Turn the engine off and wait 15 minutes for the oil to drain into the
oil pan.

3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).

4. Open the hood. Protect yourself from engine heat.

5. Locate and carefully remove the
engine oil level dipstick.

6. Wipe the dipstick clean. Insert
the dipstick fully, then remove it
again.
• If the oil level is between the

lower and upper holes or
between the MIN and MAX
marks (depending on
application),
the oil level is
acceptable. DO NOT ADD OIL.

• If the oil level is below the lower hole or the MIN mark, add enough

oil to raise the level within the lower and upper holes or within the
MIN-MAX range.

• Oil levels above the upper hole or the MAX mark may cause engine

damage. Some oil must be removed from the engine by an authorized
dealer.

7. Put the dipstick back in and ensure it is fully seated.

Maintenance and Specifications

363

2010 F-150 (f12)
Owners Guide, 1st Printing
USA
(fus)

Advertising