Adding engine oil, Maintenance and specifications – FORD 2010 F-550 v.1 User Manual

Page 360

Advertising
background image

5. Locate and carefully remove the engine oil dipstick.
• 5.4L/6.8L gasoline engines only;

for diesel engine information,
refer to the 6.0 and 6.4 Liter
Direct Injection Turbo Diesel
Owner’s Guide Supplement.

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.
• If the oil level is between the MIN and MAX marks, the oil level is

acceptable. DO NOT ADD OIL.

• If the oil level is below the MIN

mark, add enough oil to raise the
level within the MIN-MAX range.

• Oil levels above the MAX mark may cause engine damage. Some oil

must be removed from the engine by a service technician.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine
oil
in this chapter.

2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.

Maintenance and Specifications

360

2010 F-250/350/450/550 (f23)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: