Replacing front parking lamp/turn signal bulbs, Replacing side marker bulbs, Lights – FORD 2010 Focus v.1 User Manual

Page 52

Advertising
background image

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control
is in the off position and open the
hood.

2. Remove four push pins from the
radiator grille and pull the grille
forward to access the lower screw.

3. Remove three bolts and washers
from the headlamp assembly.

4. Carefully pull the headlamp
assembly up and away from the
vehicle to disengage the spring clip located on the bottom of the
headlamp assembly.

5. Remove the bulb socket from the
lamp assembly by turning
counterclockwise.

6. Pull the bulb straight out of the
socket.

Install the new bulb in reverse
order.

Replacing side marker bulbs

1. Make sure the headlamp control
is in the off position and open the
hood.

2. Remove four push pins from the
radiator grille and pull the grille
forward to access the lower screw.

3. Remove three bolts and washers
from the headlamp assembly.

4. Carefully pull the headlamp
assembly up and away from the
vehicle to disengage the spring clip located on the bottom of the
headlamp assembly.

Lights

52

2010 Focus (foc)
Owners Guide, 1st Printing
USA
(fus)

Advertising