Center console, Auxiliary power point (12vdc), Driver controls – FORD 2010 Focus v.2 User Manual

Page 58

Advertising
background image

2. To calibrate, press and hold the 7
and 9 radio preset buttons together
for approximately 10 seconds until
CAL appears. Release the buttons.

3. Slowly drive the vehicle in a
circle (less than 3 mph [5 km/h])
until the CAL display changes to the
direction value (N, S, E, W, etc.). It
may take up to five circles to
complete calibration.

4. The compass is now calibrated.

CENTER CONSOLE

Your vehicle has a variety of console features. These include:
• Cupholders
• Utility compartment

WARNING: Use only soft cups in the cupholder. Hard objects
can injure you in a collision.

AUXILIARY POWER POINT (12VDC)

Power outlet is designed for accessory plugs only. Do not insert
any other object in the power outlet as this will damage the
outlet and blow the fuse. Do not hang any type of accessory or
accessory bracket from the plug. Improper use of the power
outlet can cause damage not covered by your warranty.

The auxiliary power points are located near the bottom of the center
stack.

Do not use the power point for operating the cigarette lighter element (if
equipped).

To prevent the fuse from being blown, do not use the power point(s)
over the vehicle capacity of 12 VDC/180W. If the power point or cigar
lighter socket is not working, a fuse may have blown. Refer to Fuses and
relays
in the Roadside Emergencies chapter for information on
checking and replacing fuses.

Driver Controls

58

2010 Focus (foc)
Owners Guide, 2nd Printing
USA
(fus)

Advertising