FORD 2010 Mustang v.3 - Manual (Page 59)

HEADLAMP CONTROL
Turns the lamps off.
Turns on the parking lamps,
instrument panel lamps, license
plate lamps and tail lamps.
Turns the low beam headlamps
on.
Automatic instrumentation illumination
When the headlamps or parking lamps are switched on, a light sensor in
your vehicle monitors the outside lighting conditions and automatically
sets the instrument panel illumination to one of the following modes:
• If the headlamps and parking lamps are off, the vehicle will be in
daytime illumination mode.
• If the headlamps or parking lamps are on and daylight is detected, the
vehicle will be in daytime illumination mode.
• If the headlamps or parking lamps are on and nighttime conditions are
detected, the vehicle will be in nighttime illumination mode.
Note: The panel dimmer control works only in nighttime illumination
mode. It has no effect in daytime illumination mode. Also, selectable
features such as gauge color and halo color will not be available in
daytime illumination mode.
Autolamp control (if equipped)
The autolamp system provides light
sensitive automatic on-off control of
the exterior lights normally
controlled by the headlamp control.
• To turn autolamps on, rotate the
control to .
• To turn autolamps off, rotate the
control from the autolamp
position.
Lights
59
2010 05+ Mustang (197)
Owners Guide, 3rd Printing
USA (fus)