Starting the engine, Driving – FORD 2010 Ranger v.1 User Manual

Page 161

Advertising
background image

If starting a vehicle with a manual
transmission:
• Make sure the parking brake is

set.

• Press and hold the clutch pedal

to the floor, then put the
gearshift lever in the N (Neutral)
position.

3. Turn the key to 4 (on) without
turning the key to 5 (start).

If there is difficulty in turning the key, firmly rotate the steering wheel
left and right until the key turns freely. This condition may occur when:
• front wheels are turned
• front wheel is against the curb
• steering wheel is turned when getting in or out of the vehicle
Some warning lights will briefly illuminate. See Warning lights and
chimes
in the Instrument Cluster chapter for more information
regarding the warning lights.

Starting the engine

Note: Whenever you start your vehicle, release the key as soon as the
engine starts. Excessive cranking could damage the starter.

1

2

3

4

5

Driving

161

2010 Ranger (ran)
Owners Guide, 1st Printing
USA
(fus)

Advertising