FORD 2010 Ranger v.2 - Manual (Page 204)

Removing the spare tire or spare tire and tether (if equipped)
1. Assemble the jack handle to the lug wrench as shown in the
illustrations.
When connecting the jack handle, assemble the following:
• One handle extension and one
typical extension. To assemble,
slide parts together. To
disconnect, press the button and
pull apart.
• One wheel nut wrench. Press the
button and slide together.
2. If equipped, unlock and remove
the spare tire carrier lock from the
rear access hole located just above
the rear bumper and below the
tailgate.
Roadside Emergencies
204
2010 Ranger (ran)
Owners Guide, 2nd Printing
USA (fus)