High beams, Flash to pass, Daytime running lamps (drl) (if equipped) – FORD 2009 Crown Victoria v.2 User Manual

Page 42: Lights

Advertising
background image

5. At the desired autolamp time delay, place the headlamp switch in the
off position.

• At this point, the exterior lamps turn off and the time delay is set.

High beams

Push the lever toward the
instrument panel to activate. Pull
the lever towards you to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

Daytime running lamps (DRL) (if equipped)

Turns the headlamps on with a reduced output. To activate:
• the key must be in the on position,
• the headlamp control is in the off or

position.

• the vehicle is not in P (Park)

WARNING: Always remember to turn on your headlamps at
dusk or during inclement weather. The Daytime Running Light

(DRL) System does not activate your tail lamps and generally may not
provide adequate lighting during these conditions. Failure to activate
your headlamps under these conditions may result in a collision.

2009 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA
(fus)

Lights

42

Advertising