Mini message center (if equipped), Message center, Driver controls – FORD 2009 Edge v.1 User Manual

Page 83

Advertising
background image

MINI MESSAGE CENTER (IF EQUIPPED)

Selectable features

Press and release the TRIP/RESET stem to scroll and reset the following
functions. Select or reset the function by holding the TRIP/RESET stem
for more than two seconds.

Info menu

This menu displays the following control displays:
• Odometer
• Trip Odometer A or B
• Reverse Park Aid (if equipped)
• Autolamp (if equipped)
Odometer/Trip odometer

Refer to Gauges in the Instrument Cluster chapter.

Note: Engine can not be running to change the state of Autolamp or
Rear Park Assist (when not in Reverse).

Autolamp (if equipped)

This feature keeps your headlights on for up to three minutes after the
ignition is switched off.

1. To disable/enable the autolamp
delay feature, select this function
using TRIP/RESET stem for the
current display mode.

2. Press and hold the TRIP/RESET
stem for two seconds to select the
new Autolamp delay values of 0, 10, 20, 30, 60, 90, 120 or 180 seconds.

Reverse Sensing System (Park assist) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. To disable/enable the reverse
sensing system feature, select this
function using the TRIP/RESET
stem or put the vehicle in R
(Reverse).

2. Press and hold the TRIP/RESET stem for two seconds to turn the rear
park assist OFF or ON.

2009 Edge (edg)
Owners Guide, 1st Printing
USA
(fus)

Driver Controls

83

Advertising