Car finder, Sounding a panic alarm, Memory seats/power mirrors/adjustable pedals – FORD 2009 Expedition v.1 User Manual

Page 172: Activating the memory feature, Locks and security

Advertising
background image

Car finder

Press

twice within three seconds. The horn will chirp and the turn

lamps will flash. It is recommended that this method be used to locate
your vehicle, rather than using the panic alarm.

Sounding a panic alarm

Press

to activate the alarm. The horn will sound and the turn lamps

will flash for a maximum of three minutes. Press again or turn the
ignition to the on position to deactivate, or wait for the alarm to time out
in three minutes.

Note: The panic alarm will only operate when the ignition is in the off
position.

Memory seats/power mirrors/adjustable pedals

The remote entry transmitter allows you to recall the memory seat/power
mirrors/adjustable pedals feature.

Press

to automatically move the seat, power mirrors and adjustable

pedals (if equipped) to the desired memory position. Note: The seat will
not travel to its final position if the key is not in the ignition and the
easy entry feature is enabled.

Activating the memory feature

To activate this feature:

1. Position the seat, power mirrors and adjustable pedals (if equipped) to
the desired positions.

2. Press and hold either the 1 or 2
control on the driver’s seat for five
seconds. (A tone will be heard after
1

1

2

seconds when the memory store

is done) continue to hold until a
second tone is heard after five
seconds.

3. Within three seconds press the

control on the remote entry

transmitter.

4. A tone will be heard when the activation is complete.

5. Repeat this procedure for another remote entry transmitter if desired.

2009 Expedition (exd)
Owners Guide, 1st Printing
USA
(fus)

Locks and Security

172

Advertising