Car finder, Sounding a panic alarm, Memory seats/power mirrors/adjustable pedals – FORD 2009 Expedition v.2 User Manual

Page 171: Activating the memory feature, Locks and security

Advertising
background image

WARNING: Make sure the power liftgate is closed to prevent
exhaust fumes from being drawn into the vehicle. This will also

prevent passengers and cargo from falling out. If you must drive with
the liftgate open, keep the vents open so outside air comes into the
vehicle.

Car finder

Press

twice within three seconds. The horn will chirp and the turn

lamps will flash. It is recommended that this method be used to locate
your vehicle, rather than using the panic alarm.

Sounding a panic alarm

Press

to activate the alarm. The horn will sound and the turn lamps

will flash for a maximum of three minutes. Press again or turn the
ignition to the on position to deactivate, or wait for the alarm to time out
in three minutes.

Note: The panic alarm will only operate when the ignition is in the off
position.

Memory seats/power mirrors/adjustable pedals

The remote entry transmitter allows you to recall the memory seat/power
mirrors/adjustable pedals feature.

Press

to automatically move the seat, power mirrors and adjustable

pedals (if equipped) to the desired memory position. Note: The seat will
not travel to its final position if the key is not in the ignition and the
easy entry feature is enabled.

Activating the memory feature

To activate this feature:

1. Position the seat, power mirrors and adjustable pedals (if equipped) to
the desired positions.

2. Press and hold either the 1 or 2
control on the driver’s seat for five
seconds. (A tone will be heard after
1

1

2

seconds when the memory store

is done) continue to hold until a
second tone is heard after five
seconds.

2009 Expedition (exd)
Owners Guide, 2nd Printing
USA
(fus)

Locks and Security

171

Advertising