Compass zone adjustment, Compass calibration adjustment, Driver controls – FORD 2009 Flex v.1 User Manual
Page 90
Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the on position.
3. Press and hold the 7 and 9 button
simultaneously for approximately
five seconds until ZONE XX appears
in the CID.
4. Press and release the buttons
simultaneously until the correct
zone appears in the CID.
5. The direction will display after
the buttons are released. The zone
is now updated.
Compass calibration adjustment
Perform compass calibration in an open area free from steel structures
and high voltage lines. For optimum calibration, turn off all electrical
accessories (heater/air conditioning, wipers, etc.) and make sure all
vehicle doors are shut.
1. Start the vehicle.
1
2
3
4
5
6
7 8 9 1011
12
13
14
15
2009 Flex (471)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
90