Lights – FORD 2009 Fusion v.2 User Manual

Page 64

Advertising
background image

4. Remove screw from oval splash
shield access panel from the
exterior wheel well area. Lift up and
rearward to release a hidden finger
attachment at the lower portion of
the panel (Passenger side only).

5. From the exterior wheel well
area, reach arm through splash
shield opening to access bulb socket
(Passenger side only).

6. Remove the protective cap/grill
from the housing by grabbing it and
pulling rearward.

7. Remove the bulb socket by
rotating it counterclockwise, then
pulling it straight out of the lamp
assembly.

8. Let go of the bulb socket and
leave it dangling near the lamp
housing (Passenger side only).

9. Reach over the front bolster in the engine area, and with a tool if
necessary, bring the bulb socket upwards into an unobstructed area to
replace the bulb (Passenger side only).

10. Disconnect the electrical
connector from the bulb socket and
discard the old bulb socket.

11. Connect the new bulb socket to
the electrical connector.

2009 Fusion (fsn)
Owners Guide, 2nd Printing
USA
(fus)

Lights

64

Advertising