Speed control (if equipped), Setting speed control, Speed control – FORD 2008 E-450 v.1 User Manual

Page 54: Driver controls

Advertising
background image

The telescoping feature (if
equipped) allows the mirror to
extend approximately 3.15 inches
(80 mm). This feature is especially
useful to the driver when towing a
trailer.

SPEED CONTROL (IF EQUIPPED)

With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.

Do not use the speed control in heavy traffic or on roads that
are winding, slippery or unpaved.

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.

1. Press the ON control and release
it.

2. Accelerate to the desired speed.

3. Press the SET ACCEL control
and release it.

4. Take your foot off the accelerator
pedal.

Note:
• Vehicle speed may vary

momentarily when driving up and
down a steep hill.

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 10 mph (16 km/h) below

your set speed on an uphill, your speed control will disengage.

RES

SET

ACCEL

COAST

2008 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

54

Advertising
This manual is related to the following products: