Power steering fluid, Maintenance and specifications – FORD 2008 E-450 v.2 User Manual

Page 260

Advertising
background image

15 minutes of steady driving on an expressway/highway followed by 20
minutes of stop-and-go driving with at least four 30-second idle periods.

Allow the vehicle to sit for at least eight hours without starting the
engine. Then, start the engine and complete the above driving cycle. The
engine must warm up to its normal operating temperature. Once started,
do not turn off the engine until the above driving cycle is complete. If
the vehicle is still not ready for I/M testing, the above driving cycle will
have to be repeated.

POWER STEERING FLUID

Check the power steering fluid.
Refer to the scheduled maintenance
guide for the service interval
schedules.

Check the fluid level when it is at ambient temperature, 20° – 80° F (-7°
– 25° C):

1. Check the fluid level on the dipstick. It should be between the arrows
in the FULL COLD range. Do not add fluid if the level is within this
range.

2. If the fluid level is low, start the engine.

3. While the engine idles, turn the steering wheel left and right several
times.

4. Turn the engine off.

FULL COLD

2008 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

260

Advertising
This manual is related to the following products: