Clarion DB458RMC - Manual (Page 23)

280-8135-00
DB458RMC
25
English
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters…
3-4. Turn the [ROTARY] knob to select the
desired character.
3-5. Repeat step 3-2 to 3-4 to enter up to 30
characters for message.
3-6. Press and hold the [ ] button for 2
seconds or longer to store the message in
memory and cancel input message mode.
∗ Press and hold the [BND] button for 1 second
or longer to cancel the input message. Then
press and hold the [
] button for 2 seconds
or longer to store the message and the
message return to default setting.
● Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗ The factory default setting is “ON”.
2-1. Select “AUTO SCROL”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
To scroll automatically.
● OFF:
To scroll just 1 time when the title was
changed or the [T] button was pressed for
1 second or longer.
● Dimmer control
You can setting the dimmer control “ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “DIMMER”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● Cellular phone interrupt setting
This unit requires special wiring to mute the
audio sigal automatically when a cellular
telphone rings in the car.
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SWITCH”.
3-1. Turn the [ROTARY] knob to select the setting.
Each time you turning the [ROTARY] knob,
the setting changes in the following order:
TEL OFF TEL MUTE
● TEL OFF:
This unit continues normal operation even
when the cellular phone is used.
● TEL MUTE:
The sound from this unit is muted during
telephone calls.
Operations Common to Each Mode
● Performing a system check
2-1. Select “SYS CHK<E>”.
3-1. Press and hold the [ ] button for 1
second or longer.
“SYSTEM CHK” appears in the display,
then the unit returns to the previous
operation mode.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD and MUSIC
CATCHER. The number of titles that can be
entered for each mode are as follows.
1. Press the [SRC] button to select the mode
you want to enter a title (CD or MC).
2. Select and play a CD or MC for which you
want to enter the title.
3. Press the [D] button and display the title.
4. Press the [T] button to select user title in the
CD mode (or folder in the MC mode).
5. Press and hold the [T] button for 1 second or
longer.
6. Press the [ a ] or [ d ] button to move the
cursor.
7. Press the [BND] button to select a character.
Each time you press the [BND] button, the
character changes in the following order:
Capital letters ➜ Numbers ➜ Symbols ➜
Umlaut ➜ Capital letters...
8. Turn the [ROTARY] knob to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 10
characters for the title.
10.Press and hold the [ ] button for 2 seconds
or longer to store the title into memory and
cancel title input mode.
Clearing titles
1. Select and play a CD or MC for which you
want to clear the title.
2. Press the [D] button and display the title.
3. Press the [T] button to select user title in the
CD mode (or folder in the MC mode).
4. Press and hold the [T] button for 1 second or
longer.
5. Press and hold the [BND] button for 1second
or longer.
Mode Number of titles
CD mode 50 titles
MC mode 64 titles