FORD 2008 F-550 v.2 - Manual (Page 78)

Dual Automatic Temperature Control (DATC) system operating tips
• To reduce fog build up on the windshield during humid weather, place
the air flow selector in the position.
• To reduce humidity build up inside the vehicle, do not drive with the
system OFF, or with recirculated air engaged and A/C off.
• Do not put objects under the front seats that will interfere with the
airflow to the back seats.
• Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
• To improve the A/C cool down, drive with the windows slightly open
for 2-3 minutes after start up or until the vehicle has been “aired out”.
• For maximum cooling performance (MAX A/C):
Automatic operation:
• Press AUTO for full automatic operation.
• Do not override A/C or
(recirculated air).
• Set the temperature to 60°F (16°C).
Override operation:
• Select air distribution.
• Select A/C and
(recirculated air). Use (recirculated air)
with A/C to provide colder airflow.
• Set the temperature to 60°F (16°C).
• Set highest fan speed initially, then adjust to maintain comfort.
In
(panel) or (panel/floor) modes:
• Move temperature control to full cold.
• Select A/C and
(recirculated air). Use recirculated air with A/C
to provide colder airflow.
• Set highest fan speed initially, then adjust to maintain comfort.
2008 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
78