FORD 2008 Focus v.3 - Manual (Page 123)

The tether strap anchors in your
vehicle are in the following positions
(shown from top view, left is front
of the vehicle):
WARNING: Attach the tether strap only to the appropriate
tether anchor as shown. The tether strap may not work properly
if attached somewhere other than the correct tether anchor.
1. Position the child safety seat on the seat cushion.
2. Route the child safety seat tether strap over the back of the seat.
For vehicles with adjustable head restraints, route the tether strap under
the head restraint and between the head restraint posts, otherwise route
the tether strap over the top of the seatback.
3. Locate the correct anchor for the selected seating position.
• The anchors are located on the
rear back panel.
4. Open the tether anchor cover.
WARNING: If the tether strap is clipped incorrectly, the child
safety seat may not be retained properly in the event of a
collision.
5. Clip the tether strap to the anchor as shown.
2008 Focus (foc)
Owners Guide
USA (fus)
Seating and Safety Restraints
123