Second stage: checking tire pressure, Roadside emergencies – FORD 2008 Mustang v.3 User Manual

Page 210

Advertising
background image

Second stage: Checking tire pressure

1. Stop driving after approximately two miles. Then check the air
pressure of the damaged tire as follows:
• Ensure the compressor is turned off by pressing the “O” side of the

orange button.

• Remove the hose and the cable with the electrical plug from the kit’s

storage compartment.

• Remove the valve cap from the sealed tire, then screw the hose firmly

onto the tire’s air valve.

• Start the engine (only if the vehicle is outdoors or in a

well-ventilated area) to prevent the vehicle’s battery from draining.

• Insert the electrical plug into the vehicle’s power point.
• Read the air pressure gauge on the temporary mobility kit.

2008 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

210

Advertising