Positive retention floor mat (if equipped), Driver controls – FORD 2007 Edge v.2 User Manual

Page 107

Advertising
background image

TIRE PRESSURE SENSOR FAULT. Displayed when a tire pressure
sensor is malfunctioning, or your spare tire is in use. For more
information on how the system operates under these conditions, refer to
Understanding Your Tire Pressure Monitoring System in the Tires,
Wheels and Loading
chapter. If the warning stays on or continues to
come on, have the system inspected by your authorized dealer.

COMPASS DATA ERROR (if equipped). Displayed when the compass
is not operating properly. If the warning stays on or continues to come
on, contact your authorized dealer as soon as possible.

INTEGRATED KEY PROGRAMMING STATUS. Displayed when an
attempt is made to program a fifth Integrated Key to the Remote Key
Entry System. For more information on Integrated Key, refer to Locks
and Security
chapter in this manual.

POSITIVE RETENTION FLOOR MAT (IF EQUIPPED)

Do not install additional floor mats on top of the factory installed
floor mats as they may interfere with the accelerator or the

brake pedals.

To install floor mats that have a retention post:

Position the floor mat so that the
eyelet is over the pointed end of the
retention post and rotate forward to
lock in. Make sure that the mat does
not interfere with the operation of
the accelerator or the brake pedal.
To remove the floor mat, reverse the
installation procedure.

2007 Edge (edg)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

107

Advertising