Sounding a panic alarm, Locks and security – FORD 2007 F-150 v.1 User Manual

Page 105

Advertising
background image

2. Press

and release again within three seconds to confirm that all the

doors are closed and locked. Note: The doors will lock again, the horn
will chirp once, and the parklamps will flash once more.
If any of the doors are not properly closed the horn will make two quick
chirps and the parklamps will not flash.

Power door lock/unlock disable feature (if equipped)

The

(lock) and

(unlock) features on your power door locks will

not work from inside the vehicle when:
• the ignition has been turned to the 1 (OFF/LOCK) position, and

• 20 seconds elapse after all vehicle doors are closed and locked using

the remote entry transmitter, the keyless entry pad, or the power door
lock control (while the accompanying door is open).

The

(lock) and

(unlock) features will work again after:

• a door has become ajar,

• the ignition is turned to the 3 (ON) position, or
• using the UNLOCK

control on your remote entry transmitter or

unlocking via the keyless entry keypad.

Deactivating/activating power door lock/unlock disable feature
All vehicle doors must be closed before beginning the procedure. You
must complete Steps 1–5 within 30 seconds, or the procedure will have
to be repeated. If the procedure needs to be repeated, you must wait a
minimum of 30 seconds to begin again.

1. Turn the ignition to the 3 (ON) position, then press the

button

three times.

2. Turn the ignition to the 1 (OFF/LOCK) position, then press the
button three times.
3. Turn the ignition to the 3 (ON) position; the horn will chirp to
indicate the driver configuration mode has been activated.

4. Within five seconds, press the

control two times. Note: One horn

chirp should be heard, indicating the system has been disabled.
5. Turn the ignition to the 1 (OFF/LOCK) position to exit programming.
Note: After exiting the driver configuration mode, the horn will chirp
once to indicate a feature has been activated/deactivated.

Sounding a panic alarm
Press

to activate the alarm. Press again or turn the ignition to 2

(ACCESSORY) or 3 (ON) to deactivate.

2007 F-150 (f12)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

105

Advertising