Recommended shift speeds, Reverse, Driving – FORD 2007 Focus v.1 User Manual

Page 140

Advertising
background image

To start the vehicle:

1. Make sure the parking brake is fully set.

2. Press the clutch pedal to the floor, then put the gearshift lever in the
neutral position.

3. Start the engine, then press the brake pedal and release the parking
brake.

4. Move the gearshift lever to the desired gear, then slowly release the
clutch pedal while slowly pressing on the accelerator.

Do not drive with your foot resting on the clutch pedal or use the clutch
pedal to hold your vehicle at a standstill while waiting on a hill. These
actions will reduce the life of the clutch.

Recommended shift speeds

Do not downshift into 1 (First) when your vehicle is moving
faster than 15 mph (24 km/h). This will damage the clutch.

Upshift according to the following chart:

Recommended upshifts (for best fuel economy) when

accelerating

5-speed manual transaxle

Shift from:

1 - 2

14 mph (23 km/h)

2 - 3

24 mph (39 km/h)

3 - 4

32 mph (51 km/h)

4 - 5

44 mph (71 km/h)

Reverse

1. Make sure that your vehicle is at a complete stop before you shift into
R (Reverse). Failure to do so may damage the transmission.

2. Move the gearshift lever into the neutral position and wait at least
three seconds before shifting into R (Reverse).
• The gearshift lever can only be moved into R (Reverse) by moving it

from left of 3 (Third) and 4 (Fourth) before shifting into R (Reverse).
This is a lockout feature that protects the transmission from
accidentally being shifted into R (Reverse) from 5 (Fifth).

2007 Focus (foc)
Owners Guide (post-2002-fmt)
USA
(fus)

Driving

140

Advertising