Sounding a panic alarm, Activating the memory seat feature, Locks and security – FORD 2007 Freestyle v.1 User Manual

Page 102

Advertising
background image

and the turn lamps will flash once if all the doors and liftgate are closed.
If any door or the liftgate is not closed, or if the hood is not closed in
vehicles equipped with the perimeter alarm feature, the horn will chirp
twice and the lamps will not flash.

Sounding a panic alarm

Press

to activate the alarm. The horn will sound and the turn lamps

will flash for a maximum of 3 minutes. Press again or turn the ignition to
the 3 (RUN) position to deactivate, or wait for the alarm to timeout in 3
minutes.

Note: The panic alarm will only operate when the ignition is in the 1
(LOCK) position.

Memory seats/power mirrors/adjustable pedals (if equipped)

The remote entry system can also control the memory seat /power
mirrors/adjustable pedals feature.

Press

to automatically move the seat, mirrors and adjustable pedals to

the desired memory position (the positions correspond to the transmitter
being used). Note: You can associate a specific remote entry transmitter
to each memory position. For more information on programming the
transmitters to Driver 1 and Driver 2 memory positions respectively,
refer to How to reprogram your remote entry transmitters later in this
chapter.

Activating the memory seat feature

To activate this feature:

1. Position the seat, mirrors and adjustable pedals to the position
desired.

2. Press the SET control on the
driver’s door panel.

3. Within 5 five seconds, press the 1
or 2 control on the driver’s door
panel to which you would like to
associate with the seat, mirrors and
adjustable pedals and Driver 1 or
Driver 2 positions.

4. Repeat this procedure for the
other Driver position if desired.

2007 Freestyle (219)
Owners Guide (post-2002-fmt)
USA
(fus)

Locks and Security

102

Advertising