Setup menu, Language, Driver controls – FORD 2007 Freestyle v.2 User Manual

Page 90

Advertising
background image

Note: If message center displays the message

ЉSLOW CIRCLES TO

CALIBRATE

Љ, then continue with Step 4. Otherwise, if a heading is

displayed, continue with Step 5.

4. Drive the vehicle in circles up to
three times until the message

ЉCALIBRATION COMPLETEDЉ
appears and one of the 8 valid
headings (N, NE, E, SE, S, SW, W,
NW) is displayed.

5. Verify that the calibration process has taken place by driving the
vehicle in at least one circle, confirming that the heading changes
accordingly. If this happens, the compass has been calibrated
successfully. Otherwise, if the display shows only one heading as the
vehicle is being driven around, repeat the procedure from Step 3.

Setup menu

Press this control for the following
displays:
• Language
• Units (English/Metric)
• System Check

Language

1. Select this function from the
SETUP menu for the current
language to be displayed.

2. Pressing the RESET control
cycles the message center through
each of the language choices.

2007 Freestyle (219)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

90

Advertising