Replacing tail lamp/backup lamp bulbs, Lights – FORD 2007 Ranger v.2 User Manual
Page 63
Advertising
Replacing tail lamp/backup lamp bulbs
1. Make sure the headlamp switch is
in the OFF position and the open
the tailgate to expose the lamp
assemblies.
2. Remove the four screws and the
lamp assembly from vehicle.
3. Rotate bulb socket
counterclockwise turn and remove
from lamp assembly.
4. Carefully pull the bulb straight
out of the socket
Install the new bulb(s) in reverse order.
2007 Ranger (ran)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
63
Advertising