Full-size matching spare tire/wheel information, Spare tire information, To remove the spare tire – FORD 2006 E-450 v.3 User Manual

Page 173: Tire change procedure, Preparing to change the tire, Roadside emergencies

Advertising
background image

Full-size Matching Spare Tire/Wheel Information
This spare tire/wheel will match the road tire/wheel. When driving with
the full size matching spare tire/wheel, do not exceed 70 mph (113
km/h). It is intended for temporary use only. This means if you need to
use it, you should replace it as soon as possible.
Spare tire information
The spare tire for your vehicle is stowed under the rear of your vehicle
(except cutaway and stripped chassis models).
To remove the spare tire:

1. Open the rear doors and remove
the thumb screw and anti-theft
bracket. If finger pressure will not
remove the thumb screw, use the
lug wrench to loosen the screw.

2. Remove the access plug under
the left door.

3. Remove the jack handle from the
right side compartment and insert
the tip of the jack handle through
the access hole and into the tube.

4. Turn the jack handle
counterclockwise until the cable is
slack and the tire can be slid from
under the vehicle.

5. Remove the retainer from the
spare tire.
To stow the cable retainer with the spare removed, turn the jack handle
clockwise until all slack is removed.
Tire change procedure

Preparing to change the tire

To help prevent the vehicle from moving when you change a tire,
be sure the parking brake is set, then block (in both directions)

the wheel that is diagonally opposite (other side and end of the
vehicle) to the tire being changed.

2006 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

173

Advertising
This manual is related to the following products: