Seating and safety restraints – FORD 2006 E-450 v.3 User Manual

Page 63

Advertising
background image

Stow the tongue end of the
detachable anchor (2nd row only).

2. Pull the LH/RH seat latch handles
(located under the seat) rearward to
release the latch hook ends from the
front strikers.

3. Move the seat rearward and lift the seats rear hooks away from the
rear strikers prior to lifting the front hooks out from the front strikers.

4. With assistance, remove the seat assembly.
• To remove the 3rd, 4th, and 5th row seats (if equipped), repeat Steps

2 through 4.

To install the seat:

Ensure that the seat is latched to the vehicle floor by
pushing/pulling on the seat. If not latched, the seat may cause

injury during a sudden stop.

1. Position the seat in the vehicle.

2. Align front hooks to front strikers, prior to lowering the rear hooks
and aligning them with the rear strikers.

2006 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

63

Advertising
This manual is related to the following products: