One time disable, Deactivating/activating the beltminder feature, Seating and safety restraints – FORD 2006 E-450 v.3 User Manual

Page 72

Advertising
background image

Reasons given...

Consider...

“I have an airbag”

Airbags offer greater protection when used with
safety belts. Frontal airbags are not designed to
inflate in rear and side crashes or rollovers.

“I’d rather be
thrown clear”

People who are ejected are 40 times more
likely to DIE.
Safety belts help prevent ejection,
WE CAN’T “PICK OUR CRASH”.

Do not sit on top of a buckled safety belt to avoid the
BeltMinder

௡ chime. Sitting on the safety belt will increase the

risk of injury in an accident. To disable (one-time) or deactivate the
BeltMinder

௡ feature please follow the directions stated below.

One time disable

Any time the safety belt is buckled and then unbuckled during an
ignition ON cycle, the BeltMinder

௡ will be disabled for that ignition cycle

only.

Deactivating/activating the BeltMinder

feature

Read Steps 1 - 5 thoroughly before proceeding with the
deactivation/activation programming procedure.

The BeltMinder

௡ feature can be deactivated/activated by performing the

following procedure:

Before following the procedure, make sure that:
• the parking brake is set
• the gearshift is in P (Park) (automatic transmission)
• the ignition switch is in the OFF position
• all vehicle doors are closed
• the driver’s safety belt is unbuckled
• the parklamps/headlamps are in OFF position

To reduce the risk of injury, do not deactivate/activate the Belt
Minder

௢ feature while driving the vehicle.

1. Turn the ignition switch to the RUN (or ON) position. (DO NOT
START THE ENGINE.)

2. Wait until the safety belt warning light turns off. (Approximately 1
minute)

2006 Econoline (eco)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

72

Advertising
This manual is related to the following products: