Removing the jack and tools, Roadside emergencies – FORD 2006 Escape v.1 User Manual

Page 206

Advertising
background image

If the vehicle slips off the jack, you or someone else could be
seriously injured.

1. Park on a level surface, activate
hazard flashers and place gearshift
lever in P (Park) (automatic
transmission) or R (Reverse)
(manual transmission).

2. Set the parking brake and turn
engine off.

3. Block the diagonally opposite
wheel.

Removing the jack and tools

Non-cargo management system
(if equipped):
The jack and tools
are located under the carpeted
hardboard.

Pull back the carpet away from the lift gate, and remove the hardboard
cover.

2006 Escape (204)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

206

Advertising
This manual is related to the following products: