FORD 2006 Escape v.1 - Manual (Page 272)

3 Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range.
4 Add the coolant type originally equipped in your vehicle.
5 Fill to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.
6 Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.
LUBRICANT SPECIFICATIONS
Item Ford Part
Name or
equivalent Ford Part
Number Ford
Specification
Body hinges,
latches, door
striker plates
and rollers, seat
tracks, fuel filler
door hinge and
spring, primary
and auxiliary
hood latches Multi-Purpose
Grease XG-4 or XL-5 ESB-M1C93-B
Hydraulic clutch
fluid and brake
fluid Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid PM-1 ESA-M6C25-A
or
WSS-M6C62–A
Halfshaft CV
joints Motorcraft
Constant
Velocity Joint
Grease XG-5 WSS-M1C258–A1
Engine coolant 1 Motorcraft
Premium Gold
Engine Coolant
(yellow-colored) VC-7–A (U.S.,
except CA, OR
and NM),
VC-7–B (CA, OR
and NM) WSS-M97B51-A1
2006 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
272