To adjust the cross-bar (if equipped) position, Driver controls – FORD 2006 Escape v.1 User Manual

Page 72

Advertising
background image

To adjust the cross-bar (if equipped) position:

1. Loosen the thumbwheel at both
ends of the cross-bar (both
cross-bars are adjustable).

2. Slide the cross-bar to the desired
location.

3. Tighten the thumbwheel at both
ends of the cross-bar.

To remove the cross-bar assembly (if equipped) from the roof rack
side rails:

1. Loosen the thumbwheel at both
ends of the cross-bar (both
cross-bars are adjustable).

2. Slide the cross-bar to the end of
the rail.

3. Use a long, flat object to depress
the tongue in the endcaps on both
sides of the cross-bar.

4. Slide the cross-bar assembly off
the end of the rail.

2006 Escape (204)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

72

Advertising
This manual is related to the following products: