FORD 2006 Explorer v.2 - Manual (Page 317)

Fluid Ford Part
Name Application Capacity
Rear axle
lubricant Motorcraft
75W-140
Synthetic Rear
Axle Lubricant All 3.5 pints (1.7L)
Windshield
washer fluid Motorcraft
Premium
Windshield
Washer
Concentrate All 4.2 quarts
(4.0L)
1 Ensure the correct automatic transmission fluid is used. MERCON
௡,
MERCON
௡ V and MERCON௡ SP are not interchangeable. DO NOT mix
MERCON
௡, MERCON௡ V and MERCON௡ SP. Use of dual usage fluids in
an automatic transmission application requiring MERCON
௡ SP may cause
transmission damage. Use of a transmission fluid other than the
recommended fluid may cause transmission damage. Refer to your
scheduled maintenance information to determine the correct service
interval.
2 Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be checked by a qualified
technician.
3 Add the coolant type originally equipped in your vehicle.
4 Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only have the API Certification mark and meet the requirements
of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (4.6L).
2006 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
317