Removing the jack and tools, Removing the spare tire, Roadside emergencies – FORD 2006 Freestar v.1 User Manual

Page 240

Advertising
background image

Have a flat tire serviced by an authorized dealer in order to prevent
damage to the TPMS sensor, refer to Tire Pressure Monitoring System
(TPMS)
in the Tires, Wheels and Loading chapter. Replace the spare
tire with a road tire as soon as possible.

The spare tire and tools for your vehicle are stowed in the following
locations:

Item

Location

Spare tire

Under the vehicle, just forward of
the rear bumper.

Jack

Behind the access panel located
on the right rear quarter panel
interior trim.

Jack handle

Attached to the jack with a clip.

Flat tire tether, wing screw

Inside tire tether kit, next to jack.

Jack extension tool (cargo van
model only)

Attached to the jack kit.

Removing the jack and tools

1. Locate the access panel on the interior trim. Rotate the panel
retaining clip and remove the panel.

2. Remove the jack and lug nut wrench by turning the thumbscrew
counterclockwise to relieve tension against the stowage bracket.

Removing the spare tire

1. Wagon only: Open liftgate and
lift flap in the carpeting on the rear
tub cargo floor to expose the hex
nut. Insert the lug nut wrench on
the hex nut in cargo floor.
Cargo van only: Lift flap in mat to
expose hex nut. Insert extension
tool through access hole and engage
hex nut. Place lug wrench onto end
nut of extension tool.

2006 Freestar (win)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

240

Advertising