Tire change procedure, Roadside emergencies – FORD 2006 Ranger v.1 User Manual

Page 175

Advertising
background image

5. With the spare tire on the ground,
remove the retainer from the spare
tire.

Tire change procedure

To help prevent the vehicle from moving when you change a tire,
be sure the parking brake is set, then block (in both directions)

the wheel that is diagonally opposite (other side and end of the
vehicle) to the tire being changed.

If the vehicle slips off the jack, you or someone else could be
seriously injured.

1. Park on a level surface, activate
hazard flashers and place gearshift
lever in P (Park) (automatic
transmission) or 1 (First) (manual
transmission).

2. Set the parking brake and turn
engine OFF.

3. Block the diagonally opposite
wheel.

2006 Ranger (ran)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

175

Advertising