Driver controls – FORD 2005 Escape v.3 User Manual

Page 74

Advertising
background image

4WD DISABLED TEMPORARILY (if equipped). Displayed when the
4X4 is temporarily disabled. If the warning stays on or continues to come
on, contact your dealer as soon as possible.

4WD AUTO RESTORED (if equipped). Displayed when the 4X4 is
restored to normal operations.

ENGINE OIL CHANGE SOON/ENGINE OIL CHANGE NOW.
Displayed when the engine oil life remaining is 5% or less. When oil life
left is between 5% and 0%, the ENGINE OIL CHANGE SOON message
will be displayed. When oil life left reaches 0%, the ENGINE OIL
CHANGE NOW message will be displayed.

An oil change is required whenever indicated by the message center.
USE ONLY RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change
(approximately 15,000 km or 12 months) perform the following:

1. Press the SET control to access
the system check function.

2. Press and release the SET control
to display “OIL CHNG XXX% HOLD
SET NEW”.

3. Press and hold the SET control
for 2 seconds to display “OIL
CHANGE SET TO 100%”.

INFO UNAVAIL. These messages indicate improper operation of the
vehicle network communication systems for the following vehicle
modules.
• Fuel computer
• Charging system
• Door sensor
• Brakes

REVIEW COPY
2005 Escape (204), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)

Driver Controls

74

Advertising