Panel dimmer control, Aiming the headlamps, Vertical aim adjustment – FORD 2005 Escape v.4 User Manual

Page 50: Lights

Advertising
background image

PANEL DIMMER CONTROL

Use to adjust the brightness of the instrument panel.
• Push and hold top of control to

brighten.

• Push and hold bottom of control

to dim.

AIMING THE HEADLAMPS

The headlamps on your vehicle are properly aimed at the assembly plant.
If your vehicle has been in an accident the alignment of your headlamps
should be checked by a qualified service technician.

Vertical aim adjustment

1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.
• (1) 8 feet (2.4 meters)
• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)
• (4) Horizontal reference line
2. Measure the height from the
center of your headlamp to the
ground and mark an 8 foot
(2.4 meter) horizontal reference line
on the vertical wall or screen at this
height (a piece of masking tape works well). The center of the lamp is
marked by a 3.0 mm circle on the headlamp lens.

2005 Escape (204)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Lights

50

Advertising