Location of the spare tire and tools, Removing the jack and tools, Tires, wheels and loading – FORD 2005 Expedition v.2 User Manual

Page 224

Advertising
background image

If your vehicle is equipped with TPMS, have a flat tire serviced by a
dealer or qualified technician in order to prevent damage to the TPMS
sensor, refer to Changing tires with TPMS later in this chapter. Replace
the spare tire with a road tire as soon as possible.

Location of the spare tire and tools

The spare tire and tools for your vehicle are stowed in the following
locations:

Item

Location

Spare tire

Under the vehicle, just forward of
the rear bumper

Jack tools and jacking instructions Under the access panel located in

the floor compartment behind the
rear seat

Removing the jack and tools

1. Open the liftgate, then locate the access panel on the floor behind the
3rd row seat. Unlatch and remove the panel.

2. Remove the jack and tools assembly tray from the compartment by
turning the wing-nut counterclockwise to relieve tension against the jack
assembly tray.

3. Unsnap the wheel lug nut wrench, jack extension and handle from the
plastic tray. Remove the jack and instruction sheet from the tray
assembly.

2005 Expedition (exd)
Owners Guide (post-2002-fmt)
USA_English
(fus)

Tires, Wheels and Loading

224

Advertising