FORD 2005 Explorer v.1 - Manual (Page 43)

17. BAND: Press to toggle between
AM/FM1/FM2 frequency band.
18. Memory presets: To set a
station: Select frequency band, tune
to a station, press and hold a preset
button until sound returns.
19. Power/volume: Press to turn
ON/OFF; turn to increase or
decrease volume levels.
20. Load: Press to load a CD. Press
LOAD and a memory preset to load
to a specific disc slot. Press and
hold to load up to six discs.
21. CD: Press to enter CD mode.
CD units are designed to play commercially pressed 4.75 in (12
cm) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function correctly when used in Ford CD players. Irregular
shaped CDs, CDs with a scratch protection film attached, and CDs
with homemade paper (adhesive) labels should not be inserted
into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ballpoint pens may damage CDs. Please contact your
dealer for further information.
22. Scan: Press SCAN to hear a
brief sampling of radio stations or
CD/MP3 tracks. Press again to stop.
23. Disc/Tune: Press or to
manually tune down/up the radio frequency band, or to listen to the
previous/next CD.
REVIEW COPY
2005 Explorer (exp), Owners Guide (post-2002-fmt) (own2002),
Market: USA_English (fus)
Entertainment Systems
43