Lubricant specifications, Maintenance and specifications – FORD 2005 Focus v.3 User Manual
Page 209
The manual transmission service refill capacity is determined by filling
the transaxle to the bottom of the filler hole with the vehicle on a level
surface.
4
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.
LUBRICANT SPECIFICATIONS
Item
Ford Part
Name or
Equivalent
Ford Part
Number
Ford
Specification
Brake fluid
Motorcraft High
Performance
DOT 3 Motor
Vehicle Brake
Fluid
PM-1
ESA-M6C25-A
and DOT 3
Door latch, hood
latch, auxiliary
hood latch,
trunk latch, seat
tracks.
Multi-Purpose
Grease
XG-4 or XL-5
ESR-M1C159-A
or
ESB-M1C93–B
Lock cylinder
Penetrating and
Lock Lubricant
XL-1
none
Automatic
transaxle
Motorcraft
MERCON
V
ATF
XT-5-QM
MERCON
V
Manual transaxle Motorcraft Full
Synthetic
Manual
Transmission
Fluid
XT-M5-QS
WSD-M2C200–C
2005 Focus (foc)
Owners Guide (post-2002-fmt)
USA_English (fus)
Maintenance and Specifications
209