High beams, Flash to pass, Panel dimmer control – FORD 2005 Focus v.4 User Manual

Page 31: Headlamp vertical aim adjustment, Lights

Advertising
background image

High beams

Pull the lever towards you to
activate. Pull the lever towards you
again to deactivate.

Flash to pass

Pull toward you slightly to activate
and release to deactivate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the
instrument panel during headlight
and parklamp operation.
• Rotate the thumbwheel from left

to right to brighten the
instrument panel.

• Rotate the thumbwheel from right to left to dim the instrument panel.

HEADLAMP VERTICAL AIM ADJUSTMENT

1. Park the vehicle directly in front of a wall or screen on a level surface,
approximately 25 feet (7.6 meters) away.
• (1) 8 feet (2.4 meters)
• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)
• (4) Horizontal reference line
2. Measure the height from the
center of your headlamp to the
ground and mark an 8 foot
(2.4 meter) horizontal reference line
on the vertical wall or screen at this
height (a piece of masking tape works well).

2005 Focus (foc)
Owners Guide (post-2002-fmt)
USA
(fus)

Lights

31

Advertising